This year’s Christmas card from Iggesund Paperboard has all the requirements to be a classic that many people will keep for a long time. The van Heertum Design agency from the Netherlands has made a name for itself by not flinching from design commissions that demand both complex printing and intricate finishing.


The motif is a starry sky featuring both reindeer and celestial objects done in an extremely fine laser cut, complemented with several foils and then printed in three PMS inks. The tabs attaching the laser-cut sections to the rest of the card are so fine that they are hard to see, and it is only thanks to Invercote’s superior tear strength that the card stays in one piece.


Iggesund Paperboard has a tradition of creating intricate Christmas cards that demonstrate, and in the best cases stretch, the limits of what can be achieved with Invercote as the base material.


“We want to produce more than a Christmas card, we want designers to challenge Invercote and give us something that reflects its essence,” explains Carlo Einarsson, Director Market Communications at Iggesund Paperboard.


Iggesund Christmas card 2012


This year’s Christmas card from Iggesund Paperboard was designed by van Heertum Design VHD of the Netherlands. The spectacular laser cutting was done by Point to Paper, Waalwijk, and the base material is Invercote Creato 350 g/m2.


Each paperboard sheet was printed using three different techniques and more than 30 inks and varnishes. The printed sheets then passed through various finishing stages a total of 14 times.


“I take on these projects because I want to know how far the material can be pushed,” he says, clearly satisfied with this year’s Christmas card for Iggesund Paperboard.


The card is made of Invercote Creato 350 g/m2 and van Heertum Design VHD was responsible for both the design and implementation. The agency was assisted by a group of Dutch suppliers, such as the printers Drukkerij Tielen, Boxtel, and the foil printers Hensen Foliedrukkers, Oirschot, using foil supplied by Leonhard Kurz Benelux of Nijmegen. The characteristic laser cutting was done by Point to Paper, Waalwijk.


Frans van Heertum, founder of van Heertum Design and winner of a number of awards for sophisticated printing projects, has done large, advanced projects a number of times using Invercote as the base material. One recent project is his contribution to Iggesund’s Black Box Project, in which he printed a series of cards.


Click here to read more and download the press release at Iggesund.com

Holmen AB, P.O. Box 5407, SE-114 84 Stockholm, Sweden.

Visiting address: Strandvägen 1, Stockholm.

Tel: +46 8 666 21 00   E-mail: info@holmen.com

  • Login
  • Cookies
  • Search

© Holmen Group 2016