Facts about containerboard grades and the possibilities for lightweighting. These things can help make your packaging solutions lighter, with a strength to rely on.
alt=""
Containerboard grades and how to go lighter
Lightweight
Containerboard grades and how to go lighter
Containerboard grades
In our strive to make eco-friendly, lightweight containerboard components, we have studied and compared the different paper grades available on the market. Here's our overview, developed from CEPI's market definitions.
Virgin-based containerboard components
The expression, virgin-based or fresh fibre containerboard, has traditionally been used for kraftliner and semi-chemical fluting.
Kraft paper has traditionally been defined as “paper or paperboard whose fibre content has no less than 80% fibers obtained by the chemical sulfate or soda processes”. It is produced from fresh cellulose fibres, for example chemical pulp made from softwood and hardwood.
Semi-chemical fluting is divided into two subgrades, semi-chemical 1 and semi-chemical 2. Semi-chemical 1 is the strongest grade and generally contains more than 80% semi-chemical primary fibres. Using semi-chemical pulp generally leads to stronger components than when using recycled-based pulp.
Recycled-based containerboard components
Recycled-based containerboard components normally consist of recycled liner, also called testliner, and recycled fluting medium, in different grammages.
Testliner is a predominantly recycled fibre-based paper, which can be classified from 1-4 depending on their burst index and SCT values. Testliner 1 is the strongest and testliner 4, is the weakest medium allowed to be called testliner.
In The European list of corrugated base papers, recycled medium fluting is defined as grammages from 100 g/m2 and up. Within this category there are four subgrades; Medium 2, Medium 1, Medium high performance 1 and Medium high performance 2. Medium high performance 2 is the strongest and Medium 2 is the weakest.
The list defines Lightweight recycled medium (LWM) as recycled fibre-based papers in grammages below 100 g/m2.
Source: Containerboard Europe, European list of corrugated base papers.
Containerboard
Put your components to the test
Lightweight your packaging by using containerboard components in the optimal strength for your end use. Here's how to test tensile strength, burst strength and short span compression (SCT).
Lower emissions
Three ways to lower carbon dioxide emissions
- Lightweight the input materials
- Choose components made with lower CO2 emissions per tonne
- Choose nearby suppliers or opt for climate smart transports
Holmen Elevate
The next-generation kraftliner for lightweight, sustainable packaging
If you are looking to reduce packaging weight without sacrificing strength or print quality, learn more about Holmen Elevate, our fresh fibre ultra-light kraftliner. With grammages starting as low as 72 gsm, it helps you create strong, lightweight packaging that’s food-safe, water-resistant, and fully recyclable.